Product description
Tradesman Edge Geared Belt Reduction for Super High Torque
The Tradesman EDGE comes in two basic models both of which will accommodate belts: Edge 810 and Edge 12
- Edge810 has 5/8″ shafts and will mount 6″, 8″ or 10″ inch wheels (with bushing)
- The Tradesman Edge 12 has 2″ long 12 mm shafts to accommodate the mounting of Tormek wheels (wet or dry) and or Tradesman Belt Sanders
- Choose your model from the drop-down menu above and add then add wheels and attachments further down this page
100-2000 RPM
Geared Belt Reduction – Balanced Drive
DC Variable Speed – Reversing
Plug into any 120V outlet (240V available)
CBN Wheels, Tormek Attachments, Belt Sanders…
Designed by Jeff Toycen, Built in Canada
Wheel or Belt the choice is yours The EDGE will make your sharpening projects much more enjoyable
The Edge 810 with 8″ and 10″ Tradesman CBN Wheels
- This versatile model lets you mount most standard 8″ and 10″ grinding wheels with a 5/8″ arbor (7/8″ shaft adapter for 10″ wheels)
- Add our Tormek Bracket and rest to use your favorite Tormek sharpening jigs
- Add any of our belt sanding attachments
The Edge 12 with 10″ Tradesman CBN Wheels and set up to use Tormek Jigs and Water Bath
- Choose this model if you intend to run Tormek wheels (or any wheel with 12mm arbor). The shafts are 2″ long for 2″ wide plated wheels
- Add our Tormek Bracket and rest to use your favorite Tormek sharpening jigs
- Add water bath troughs
- Add any of our belt sanding attachments
The Edge set up with two Belt Sanders and Felt Buffing Wheel
- Both the Edge 810 and Edge 12 can be set up like this with two belt sanding attachments, shaft extension and hard felt buffing wheel
- Add our Frame-to-Frame Tormek Bracket and rest to use your favorite Tormek sharpening jigs on dual belt sanders
Edge Belt-Belt-Felt Promotion
What makes the edge so quiet?
- DC variable speed motor and control
- Whisper Drive with Torque Compensation
- The belt sander platens are machined flat to within .001″ and have rads all around
What features make it great for sharpeners?
- The platens have an open belt area
- The belt frame has been reduced in size to improve the approach so that a blade can be sharpened right to the bolster/ handle
- motor shaft isolated from main shaft with geared timing belt
- Large and comfortable tool / work / hand rests can be positioned almost anywhere on the belt: front, back or base
- Open side panel threaded holes for scissor fixturing
- Belts can be vertical or horizontal, moved with no tools required
Add Wheels to your Tradesman Edge 810
Add Attachements to your Tradesman Edge 810
Add Belt Sanders to your Tradesman Edge 810
Our Belts Sanders are Like No Other
- The platens are machined square and flat to within .001″
- The platens have rads all around
Reviews
There are no reviews yet.