• US Office
    808 Proctor Avenue Ogdensburg, NY 13669-2205
  • Canadian Office / Engineering
    2353 Ridgecrest Place, Ottawa Ontario, K1H 7V4

Tradesman Edge Geared Belt Reduction Precision Workstation

$ 1,735.00 (USD)

Tradesman Edge DC Variable Speed Bench Grinder Without Wheels or Work Rests

  • Two models: choose Edge810 (runs 8″ and 10″ wheels and belt sanders) or Edge12 (runs Tormek wheels with 12mm bore and belt sanders)
  • DC Variable Speed Reversing, 50-2000 rpm
  • Geared belt reduction with DC Variable Speed Whisper Drive and Torque Compensation
  • Ready to mount any Tormek or any of our Tradesman grinding attachments
  • Guards, wheels, attachments not included (choose below, guards are included with wheels)
SKU: N/A Category:
Clear

Product description

Tradesman Edge Geared Belt Reduction for Super High Torque

The Tradesman EDGE comes in two basic models both of which will accommodate belts: Edge 810 and Edge 12

  • Edge810 has 5/8″ shafts and will mount 6″, 8″ or 10″ inch wheels (with bushing)
  • The Tradesman Edge 12 has 2″ long 12 mm shafts to accommodate the mounting of Tormek wheels (wet or dry) and or Tradesman Belt Sanders
  • Choose your model from the drop-down menu above and add then add wheels and attachments further down this page
Tradesman Edge bench Grinder

100-2000 RPM

Geared Belt Reduction – Balanced Drive

DC Variable Speed – Reversing
Plug into any 120V outlet (240V available)

CBN Wheels, Tormek Attachments, Belt Sanders…

Designed by Jeff Toycen, Built in Canada

Wheel or Belt the choice is yours The EDGE will make your sharpening projects much more enjoyable

The Edge 810 with 8″ and 10″ Tradesman CBN Wheels

  • This versatile model lets you mount most standard 8″ and 10″ grinding wheels with a 5/8″ arbor (7/8″ shaft adapter for 10″ wheels)
  • Add our Tormek Bracket and rest to use your favorite Tormek sharpening jigs
  • Add any of our belt sanding attachments
Tradesman Edge 810 DC Variable Speed Bench Grinder

The Edge 12 with 10″ Tradesman CBN Wheels and set up to use Tormek Jigs and Water Bath

  • Choose this model if you intend to run Tormek wheels (or any wheel with 12mm arbor). The shafts are 2″ long for 2″ wide plated wheels
  • Add our Tormek Bracket and rest to use your favorite Tormek sharpening jigs
  • Add water bath troughs
  • Add any of our belt sanding attachments
Tradesman Edge 12

The Edge set up with two Belt Sanders and Felt Buffing Wheel

  • Both the Edge 810 and Edge 12 can be set up like this with two belt sanding attachments, shaft extension and hard felt buffing wheel
  • Add our Frame-to-Frame Tormek Bracket and rest to use your favorite Tormek sharpening jigs on dual belt sanders

What makes the edge so quiet?

  • DC variable speed motor and control
  • Whisper Drive with Torque Compensation
  • The belt sander platens are machined flat to within .001″ and have rads all around

What features make it great for sharpeners?

  • The platens have an open belt area
  • The belt frame has been reduced in size to improve the approach so that a blade can be sharpened right to the bolster/ handle
  • motor shaft isolated from main shaft with geared timing belt
  • Large and comfortable tool / work / hand rests can be positioned almost anywhere on the belt: front, back or base
  • Open side panel threaded holes for scissor fixturing
  • Belts can be vertical or horizontal, moved with no tools required

Add Wheels to your Tradesman Edge 810

Add  Belt Sanders to your Tradesman Edge 810

Our Belts Sanders are Like No Other

  • The platens are machined square and flat to within .001″
  • The platens have rads all around

Additional information

Weight 15 kg
Dimensions 39 × 39 × 39 cm

Reviews

There are no reviews yet.

Be the first to review “Tradesman Edge Geared Belt Reduction Precision Workstation”

You may also like…