Uncategorized

Smooth Super quiet Accurate with Corner Rads for Woodturners

New for Summer 2019   Tradesman 810 Workstation , one of the Tradesman Geared Belt Units

These are Quite Powerful very quiet typically run between 200 and 2000 RPM

The 810 will mount 2 or 4-inch belts 6, 8 or 10-inch wheels

The Machinist with the necker tip grinder is a necks flats cut off and conical tip grinder for carbide end nills or rounds

Jack Plane Blade set here 

Fits on all Tradesman grinders utilize that handy Tormek rail.

Worried about your angles? Do you use a felt wheel to cover angle mismatch

We think you should be able to repeat and angle within a few minutes, Grind at a speed appropriate for finishing, no risk of damage, and only need a strop type effort to debur a good piece of steel.

On our Twin Belt machine rough on the left 200 grit, exact angle  match on the right with a  600 grit, Debur minimal

With this enhanced freehand approach, the stroke is captive but you won’t get cornered by your set up when doing a long blade or a large curved tip. our supermagnets let you rotate the knife to follow a tip radius

With the Tradesman edge running a 600 grit edge grind at 150 surface feet on machined platens allows for perfectly straight hand-fed angles

With the DC whisper drive, in our shop you can hear the clock ticking in the background while running twin belts, this also means you can hear when the blade contacts the belt.

Just like our tool grinders.

Its a new day

We do like it when our machines are smooth and quiet, side to side run out is always a challenge

Eliminating the previous snapring and washer assembly (which is never flat)
This new flange protrudes thru the side plate using that normally unutilized shaft length to help govern wheel run out

Plus the larger diameter provides a large driven face to shoulder against.

Toycen DC whisper drive Speed range from 150 to 3000 surface feet
Any Position either belt, Reversing, Quiet, Unstoppable Geared Belt Drive, available in various speed ranges

Rough, Finish, Hone  ~~  Belt Belt Felt

.